Are you looking for the right heat resistant safety gloves or heat proof gloves? If you're looking for gloves to protect your workers from heat injury, read this article.
You'll learn how heat-resistant gloves are made, designed and learn how to shop for them.
-
What are heat resistant safety gloves and what are they used for?
-
What factors need to be considered for heat resistant gloves?
-
What are the benefits of using heat resistant safety gloves?
-
How to choose the right heat resistant safety gloves for the job?
-
How to properly care for and store your heat resistant safety gloves?
-
How should heat-resistant safety gloves be used in the welding industry?
-
Why Sourcing Heat Resistant Safety Glove Manufacturers from China?
-
How to find heat resistant safety glove manufacturers from China?
-
How to choose the right heat resistant safety glove manufacturer?
1. What are heat resistant gloves and what are they used for?
Heat resistant safety gloves can be used in a variety of thermal hazard handling situations. Protecting your hands from burns and heat damage with heat-resistant and heat-resistant gloves will keep your hands safe in the most demanding handling situations.
2. What factors need to be considered for heat-resistant gloves?
Heat resistant gloves typically involve several factors in the temperature of the object being handled, including:
-
Temperature
-
Weight
-
Time of contact
-
Frequency of tasks
-
Pressure
It goes without saying that the more of the above factors are present, the more thermal protection you need.
3. What are heat resistant safety gloves made of?
There are two main options for heat resistant gloves: terry knit and synthetic. The deciding factor for which material you should use depends on the temperature you are exposed to.
Different heat-resistant materials offer different degrees of protection.
|
Material |
Advantages |
Disadvantages |
|
Leather |
Has natural flame retardant properties and good abrasion protection. Can be one of the more affordable options. |
The heat is close to the skin, hardens with heat over time resulting in less flexibility and comfort, and is not highly resistant to cuts. |
|
Terrycloth |
Loop knit traps air and creates more insulation. With some cut and abrasion protection, it is comfortable to wear. |
Absorbs liquids quickly and is not as nimble as other materials. Not to be used in wet, chemical liquid environments. |
|
Aramid |
It is inherently flame retardant and has a high degree of cut resistance and dexterity. |
It is a very good material, so it is only natural that it is expensive. |
|
Acrylic |
Glove liner adds insulation for high thermal contact and improves durability. |
Relatively speaking it will be heavier than other gloves. |
|
Aramax |
Moves heat away from the skin and can be designed to increase flame retardancy. Perfect for warm environments where flames and sparks are present. |
Not designed for high temperature applications. |
4. When should heat resistant safety gloves be worn?
Usually, when your work has the following situations, be sure to choose suitable heat-resistant safety gloves to protect yourself and your workers:
-
Chemicals in the laboratory
-
Contact with hot surfaces (A 2013 Michigan State University study showed that 74% of injuries are from thermal burns.)
-
Friction
-
Gasoline, hot tar and grease
-
heat from liquids such as boiling water
-
Thermomechanical, Metals and Workpieces
-
Industrial cleaners such as rust removers and drain cleaners
-
manufacturing workplace
-
molten metal
-
open flames and explosions
-
Overheating of electrical equipment
-
sun exposure
5. What are the benefits of using heat resistant safety gloves?
There are countless cases of injuries caused by not wearing or not wearing heat-insulating gloves correctly each year around the world, which shows the importance of wearing protective gloves correctly.
It can effectively reduce the possible injuries to the hands and protect the safety of workers' hands.
6. What are the grades of thermal insulation gloves?
Before understanding the two standards, we have to remind again and again:
The contact heat test is performed in the palm of the hand only. It does not guarantee the thermal performance of the back of the hand.
This test does not test flame resistance, only contact heat resistance.
Compare different heat resistant materials and pay close attention to their ASTM F1060 (according to ANSI 105 standard) or EN 407 rating to find the right heat resistant glove for your application:
|
ASTM F1060 |
|
|
Level 0 |
Less than 176⁰ F (80⁰ C) |
|
Level 1 |
176⁰F (80⁰ C) |
|
Level 2 |
284⁰F (140⁰C) |
|
Level 3 |
392⁰F (200⁰C) |
|
Level 4 |
500⁰F (260⁰C) |
|
Level 5 |
608⁰F (320⁰C) |
|
EN 407 Contact Heat Resistance |
|
|
Rating 1 |
212⁰F (100⁰C) |
|
Rating 2 |
482⁰F (250⁰C) |
|
Rating 3 |
662⁰F (350⁰C) |
|
Rating 4 |
932⁰F (500⁰C) |
7. How to choose the right heat resistant safety gloves for the job?
-
Dry and moist heat
As mentioned above, neoprene work gloves are better for damp heat hazards. Meanwhile, Terry knit gloves are better at handling dry sources.
-
Heat and ambient heat
Thermal and ambient heat have different levels of protection. Different gloves allow you to be exposed to and work near heat sources in different temperature ranges.
-
Sparks and flames
If you want to handle an open flame, you need to check the fire resistance of your work gloves. Note that heat and fire protection are not the same thing.
-
Heat dissipation
For higher heat applications, such as handling hot steel or ceramic molds, if the glove cannot dissipate the accumulated heat over time, thermal stress will build up within the glove and make it less comfortable.
Glove fabric will absorb heat. If the glove does not have time to cool down between uses, the user will begin to feel heat through the glove.
Gloves with more insulation are required if contact is made at high frequency.
-
Cut and tear protection
If your workers are working in situations where there is a risk of cuts, they may need a pair of gloves with long-lasting cut and abrasion protection and proper heat resistance.
In addition to hot surfaces, new gloves are available with cut-level protection against sharp edges.
-
Contact time and weight
How long will you hold this item? The longer you handle an item, the more heat is transferred from the object to your PPE and ultimately to your hands.
-
Types of Grip and Palm Coatings
Applications that require more dexterity and hand motion, such as grasping hot parts from an oven, have led to the development of high-strength heat-resistant gloves with more grip and control to handle hot and heavy materials.
Additional features such as nitrile palm points on top of the nitrile or silicone palm coating further isolate the worker's hands while improving the glove's grip.
8. How to properly care for and store your heat resistant gloves?
-
Wipe off dirt (especially leather gloves)
-
Scrub with moisturizer or shoe polish (leather)
-
Wipe with damp cloth (leather) or clean with soap and water (fabric and coatings)
-
Lubricate if necessary (leather)
-
open air drying
-
Store in a dry place away from humidity, intense heat and light etc. to keep all their qualities.
Change heat-resistant safety gloves regularly, if you can.
9. How to choose heat-resistant safety gloves in the welding industry?
Welding is a technical activity that generates sparks and arcs, so it requires a lot of skill and heat protection.
The choice of gloves for welding is usually based on thermal insulation, insulation and dexterity.
10. Why Sourcing Heat Resistant Safety Glove Manufacturers from China?
-
China is the country with the most complete range of industries in the world. Cotton yarn, polyester, latex and other raw materials used in heat-resistant safety gloves have a complete supply system in China. The quality of raw materials is reliable and stable, and the price is low.
-
Chinese workers are hard-working and efficient, thus reducing the unit cost of products
-
There are many shipping ports in China, including Shanghai, Ningbo, Qingdao, Tianjin, Shenzhen, Fuzhou, etc. Most of the factories are close to the ports, which reduces the logistics cost of products. And the inland transportation is quite developed and the logistics is fast.
-
In labor-intensive industries, the quality of products produced in China has reached a leading level.
11. How to find heat resistant safety glove manufacturers from China?
Ways to find heat resistant safety glove manufacturers in China include:
-
Online platform
Online platforms such as Alibaba and Made in China are ideal places for different manufacturers of heat-resistant safety gloves to market to customers.
Manufacturers can usually offer you different prices and after-sales services.
When searching on these sites, you must make sure that you are selecting a manufacturer and not a distributor or trader.
Also, don't deal with a specific manufacturer until you verify their credentials.
The benefit of having a large number of manufacturers on these sites is that you can negotiate or select the right manufacturer for your automatic power press.
You also have the opportunity to negotiate the price of the product.
-
Google, Bing search
Most good heat resistant safety glove manufacturers have their own websites to advertise their products.
However, many excellent Chinese manufacturers do not pay attention to this or start late, but this does not mean that they cannot provide excellent products.
So it might be hard to find them on the first few pages, but you can check out a few pages at many good manufacturers of heat resistant safety gloves to choose from.
Or you can add "China" to your keyword to see more Chinese manufacturers.
-
Purchasing agent
Many purchasing agents in China know that there are different manufacturers of heat resistant safety gloves in China.
They know the production capacity and pricing of these manufacturers.
These are important specifications that your purchasing agent can help you with when looking for a manufacturer.
Sourcing agents can also save you the trouble of finding reliable manufacturers, as they usually have a ready list for you to choose from.
The main limitation of using a purchasing agent is the high cost of finding a manufacturer.
There's no way to compare what you're paying here to what you might lose if you bet on finding a manufacturer.
-
Trade show
Whenever a Chinese trade show is held in your country or China, you should expect Chinese manufacturers to showcase their products.
This allows you to interact with different manufacturers and ask them about different aspects of their manufacturing process.
The advantage of this method is that you can meet face-to-face with a specific manufacturer.
This allows you to negotiate different specifications with the manufacturer.
Common trade shows and fairs in China include: Canton Fair, etc.
Crucially, once you have an agreement with a specific manufacturer, you need to visit their premises before starting production.
12. How to choose the right heat resistant safety glove manufacturer?
During the buying process, you should pay attention to the following points:
-
Determine the specifications and parameters of the purchased heat resistant safety gloves according to your needs and parameters. Especially for safety gloves, the thickness, size, color, safety glove model and other requirements have been determined, and you can contact the manufacturer to purchase.
-
Find out which manufacturers make the heat resistant safety gloves you want to buy. In this link, it is often the easiest to ignore, because no matter which manufacturer is contacted, the manufacturer will basically inform the professional production of this model. In fact, different manufacturers often produce different models, and manufacturers often provide various types of products through transfer. Therefore, users should pay special attention to choosing the one that best suits their needs.
-
After contacting several companies that manufacture heat-resistant safety gloves and getting the price, specification, payment method and shipping method of heat-resistant gloves, the most important step is to choose the manufacturer you want to buy from. Generally, after removing the highest price and the lowest price, choose a reliable manufacturer, so that while ensuring the quality and after-sales service, you can get a better price/performance ratio.
-
Select several special manufacturers as a comparison to understand the use, quality of safety gloves, especially after-sales service. All things considered, choose the manufacturer with the best price and service.
-
After confirming the manufacturer, the next step is to sign the contract, pay the deposit, take delivery or cash on delivery and other related matters.
Read More:
China Top 10 PPE Manufacturer 2022
